Infectious Disease Disinfection
Infectious disease disinfection with EPA-registered products and full surface coverage.
See infectious disease disinfectionGet high-touch surfaces cleaned and disinfected in a home, office, rental or shared space in Burkitt Commons after illness or possible exposure. EPA-registered products are used according to their labels.
After illness or possible exposure, COVID-19 and virus disinfection focuses on affected spaces and surfaces touched frequently. The service removes soil, then uses an EPA-registered disinfectant according to its label and observes the complete contact time.
The service can cover a home, office, school, restaurant, rental, care setting or other shared space. Cleanup technicians identify touch points such as door knobs, counters, light switches, desks, restroom fixtures and shared equipment. They also consider nearby surfaces that people may touch while moving through the property.
This work is sometimes called coronavirus cleaning, COVID-19 decontamination, biohazard decontamination, biohazard remediation or infectious disease cleanup. It is different from ordinary janitorial cleaning. Cleanup crews use protective equipment, product instructions and a written scope so every step can be checked. The remediation process does not replace fresh air, building ventilation, handwashing or staying home when sick.

You can examine which special materials, rooms and surfaces the cleaning service will include before work begins. Comparing the stated work is easier when the scope is clear.
Instead of treating every situation alike, the scope can be adapted to a rental, restaurant, office, home or other shared setting.
You receive a record of the product name and labeled contact time, letting you see what was applied and move forward with your plan to reopen.
For privacy that matters to you and your loved ones, unmarked vehicles are available, and technicians use protective gear while caring for personal property.
COVID-19 disinfection is most useful when you need a documented, room-by-room cleaning process after illness, an exposure concern or repeated use by many people. Common situations include:
When someone has been sick, carefully clean high-touch surfaces across kitchens, bedrooms, common living areas and bathrooms.
Desks, meeting rooms, break areas, restrooms and shared devices can be treated before normal use resumes.
Property owners may schedule an apartment, hotel or short-term rental cleanup after reported illness or before its next approved use.
Focused cleaning may be needed for equipment, counters and other frequently touched spots in stores, gyms and customer-facing businesses.
Before technicians begin cleanup, keep people out and note clear details about the rooms in question. Start with these actions:
Call (888) 440-9227Published guides do not include a stand-alone COVID-19 price. For comparable infectious disease disinfection, published guide figures run from $1,000 to $10,000. Actual scope varies based on the space and germ, how many rooms and surfaces are included, whether air-system work is part of the request and whether testing is wanted.
These ranges come from published national cost guides, not from a site visit. An on-site assessment determines your property's price, which is explained to you before the cleanup starts.
Ask about cost: (888) 440-9227Coverage is determined by your policy and the reason the service is needed. Never presume that business, homeowners or renters insurance pays for preventive cleaning for coronavirus. If time permits, ask your insurance company before cleaning begins.
The lease, the location of the affected area and local rules can shape who arranges cleaning in a rental or common area.
Business owners need to check required records, communicable disease terms, deductibles and exclusions with the insurance company before depending on coverage.
Routine disinfection might be classified as maintenance, not as a covered insurance loss. Find out if a documented illness receives different treatment from another event under your policy.
Store the product information, work scope, invoice and photographs. These records support insurance assistance and help insurance companies check what work was requested and completed.
A controlled sequence guides coronavirus biohazard decontamination. Assessment comes first, followed by cleaning, disinfection and a concluding check. Each product label directs the complete process, including the method used on individual surfaces.
Technicians check the rooms, occupancy history, sensitive materials and high-touch points with you before work starts.
The work area is marked or closed as needed, and technicians select gloves, eye protection and other protective equipment for the products and setting.
Cleaning begins with removal of dust and visible soil, which could otherwise block disinfectant from contacting a surface evenly.
Label directions determine the coverage and concentration when compatible surfaces are treated with an EPA-registered disinfectant.
The surface is kept wet for the label's contact period and is not sprayed only to be wiped dry right away.
Shared electronics, unfinished wood and soft materials receive methods suited to the item instead of being soaked with a general spray.
Each room is reviewed against the checklist, paying close attention to switches, door pulls, shared equipment and fixtures.
Your information includes the completed scope, products used, drying and ventilation instructions, and guidance on when the treated area may be used.
Phone any hour. A specialist in COVID-19 and virus disinfection takes your call, explains each step and agrees on a start time with you.
The main risks during disinfection come from illness exposure, chemical misuse and incomplete surface coverage. A careful plan limits avoidable contact and serious health risks without claiming that surface cleaning removes every route of transmission.
The label states how long a disinfectant needs to stay visibly wet. Drying the product by wiping too early may prevent it from performing as intended.
Cleaners who enter a room occupied recently may come close to contaminated belongings or someone who is ill. Access control and suitable protective gear reduce unnecessary contact during the work.
Shared tools, remote controls, faucet controls and door plates can easily be overlooked. Follow a room-specific checklist to cover the affected area completely.
Can you clean it yourself? Standard cleaning may suffice if the property has no specific exposure concern and no one is ill now. For sensitive materials, known illness, large common areas or workplaces requiring a documented scope, professional cleanup can help you address vital touch points while following product labels.
Virus disinfection usually treats surfaces rather than removing parts of the property. Compatible hard materials can be cleaned and disinfected. Porous belongings that are damaged or deeply soiled need a separate assessment.

Choose an EPA-registered disinfectant suited to both the surface and target virus, then follow all label directions covering dilution, use and complete contact time.
The label identifies where the disinfectant may be used, along with ventilation needs and applicable protective equipment.
Federal requirements for worker protection and handling under OSHA Bloodborne Pathogens Standard 29 CFR 1910.1030 apply if the area also contains other potentially infectious materials or blood.
Tennessee treats soaked materials from a biohazard scene as medical waste, a type of special waste. Rules from the Department of Environment and Conservation's Division of Solid Waste Management control its treatment and disposal, so it cannot go in household trash.
Several hours may be enough for a focused visit at a residence, but a multi-room business or large office could take longer or need staged work. Scheduling is determined by the number of rooms, furniture quantity, material compatibility and the necessary contact times.
The full COVID-19 and virus disinfection guide covers what is cleaned or removed, odor and air quality work, and the rules that apply in Davidson County.
Read the full COVID-19 and virus disinfection guide
Containment, entry and cleanup plans can be influenced by local housing, population and access details.
For an injury during discovery, Tristar Southern Hills Medical Center is the nearest listed hospital at approximately 6.2 miles away.
Concord Hills, Autumn View, and High Point are nearby, which helps define practical routes for crews, equipment, and sealed waste containers.
In Burkitt Commons, identifying the correct building entrance can reduce unnecessary movement through shared spaces during a sensitive cleanup.
Your phone conversation can include questions about service in nearby ZIP codes and communities.
Infectious disease disinfection with EPA-registered products and full surface coverage.
See infectious disease disinfection
MRSA, C. diff and norovirus cleanup for homes, care settings and gyms.
See mrsa, c. diff and norovirus cleanup
Planning for industrial and commercial biohazard cleanup considers operations and access to the site.
See commercial and industrial biohazard cleanup
Biohazard cleanup for clinics, care homes and healthcare facilities.
See hospital and healthcare biohazard cleanup
After exposure or injury, workplace biohazard cleanup covers offices and other work sites.
See office and workplace biohazard cleanup
School and daycare biohazard cleanup outside of class hours.
See school and daycare biohazard cleanup
Rental property biohazard cleanup covers hotels and Airbnb units as well as rentals.
See hotel, airbnb and rental biohazard cleanup
Carpet and upholstered items receive biohazard cleaning or are removed safely if necessary.
See biohazard carpet and upholstery cleaningWhen water and soap are unavailable, an alcohol-based hand sanitizer can lower the amount of germs on your hands. Rub all areas of your hands until dry using a sanitizer that has at least 60 percent alcohol. Hand sanitizer belongs on your hands rather than on electronic equipment, furniture or rooms. When your hands look dirty, wash them using water and soap.
Read the disinfectant label and furniture care instructions after checking if the wooden surface is sealed. A suitable product can be applied on sealed wooden surfaces once spot testing is complete. Unfinished or delicate wood can stain, swell or lose its finish, so avoid soaking it. Use a method suited to the material when the label does not permit the surface.
Remove visible dirt before using an EPA-registered disinfectant appropriate for both the target virus and surface. Apply full coverage and let the surface remain wet throughout the label's contact period. Wear the protective equipment named on the label, ventilate as directed and never mix cleaning chemicals.
Completion may take one visit when the home area is limited and focused. Work may be divided into stages or take longer for large offices, schools and commercial properties. Access and room count influence timing along with furnishings, product contact time and sensitive surfaces. Ask for a scope that shows the areas included and any reentry instructions.
Because the cause of COVID-19 is a biological agent, exposure precautions are called for when working around a known illness. The specific category for cleanup varies by setting and by whether bodily fluids, regulated waste or blood are present too. Blood cleanup and hazardous waste removal are different tasks from routine disinfection of surfaces.
Start with rooms and touch points used by the ill person. Keep other people away, clean visible soil and disinfect compatible hard surfaces according to the product label. Launder compatible fabrics using their care directions. For sensitive materials, large common areas or documented room-by-room scopes, a professional visit may be useful.
Discreet, respectful COVID-19 and virus disinfection, 24 hours a day, with crews in unmarked vehicles.